plivo issue  [SOLVED]

Issues related to Freeswitch

Re: plivo issue  [SOLVED]

Postby falak » Wed Jul 09, 2014 11:12 am

.........
2014-07-08 13:25:24,863 plivo-outbound[1114]: ERROR: (6) Processing Call Failure !
2014-07-08 13:25:24,863 plivo-outbound[1114]: ERROR: (6) Unrecognized Element: ['ReceiveFax']
..........


Error above shows that the plivo installation does not support ReceiveFax element. This means that either your installation is not correct or you have installed plivo without fax support.

It is recommended to remove this installation of plivo and install plivo again as mentioned in Setup and Run Plivo Framework section of this page. Make sure one thing, before step 3 of plivo installation, edit the file "plivo_install.sh" and find and replace the following line
Code: Select all
PLIVO_GIT_REPO=git://github.com/plivo/plivo.git

with this line.
Code: Select all
PLIVO_GIT_REPO=git://github.com/plivo/plivoframework.git

This is because plivo repository has been changed.
Hope that this will resolve your issue.
falak
Site Admin
 
Posts: 166
Joined: Tue Jan 17, 2012 7:33 am

Re: plivo issue

Postby falak » Thu Jul 10, 2014 9:39 am

Nice to hear that. Good luck.
falak
Site Admin
 
Posts: 166
Joined: Tue Jan 17, 2012 7:33 am


Return to Freeswitch related Issues

Who is online

Users browsing this forum: No registered users and 1 guest